Las Bombas de diafragma Wilden metalicas tiene modelos desde 1/4" hasta 3" en aluminio y acero inoxidable.
Son idóneas para la industria, para trasvasije de productos en general, y son amigables con el medio ambiente.
Existen en tamaños de 13 mm. (1/2") hasta 76 mm. (3"), con cuerpo en aluminio y acero inoxidable con elastómeros en Buna-N, Neopreno, EPDM, Viton®, Santopreno, Poliuretano o PTFE. El rango de temperaturas llega hasta 107,2 °C (225 °F)
Las bombas de diafragma FTI AIR metalicas son muy faciles de mantener. Con solo cambiar en forma periodica la parte humeda que comprende los diafragmas, las bolas, los asientos y los sellos, usted se asegura una larga vida util libre de fallas.
Se recomienda usar siempre usar filtros FR a la entrada de toda bomba de diafragma neumatica para asi prolongar la vida util de la valvula de aire.
Características | |
Flow Rate to 38.6 LPM (10.2 GPM) | |
Max Pressure = 8.6 BAR (125 PSI) | |
Wetted Housings (Water Chambers and Manifolds) |
|
Material | Ship Wt |
Aluminum | 6 kg |
316 S.S. | 9.2 kg |
NON-Wetted Housings | |
Description | Material |
Center Section | Nylon |
Air Valve | Bronce |
Maximum Suction Lift Capability: | 1 m |
Maximum Diameter Solids: | 1.6 mm |
Características | |
Flow Rate to 132 LPM (35 GPM) | |
Max Pressure = 8.6 BAR (125 PSI) | |
Wetted Housings (Water Chambers and Manifolds) |
|
Material | Ship Wt |
Aluminum | 12 kg |
316 S.S. | 16 kg |
NON-Wetted Housings | |
Description | Material |
Center Section | Aluminio |
Air Valve | Bronce |
Maximum Suction Lift Capability: | 5.8 m |
Maximum Diameter Solids: | 3 mm |
Características | |
Flow Rate to 306.5 LPM (81 GPM) | |
Max Pressure = 8.6 BAR (125 PSI) | |
Wetted Housings (Water Chambers and Manifolds) |
|
Material | Ship Wt |
Aluminum | 17.5 kg |
316 S.S. | 26.2 kg |
NON-Wetted Housings | |
Description | Material |
Center Block | Polypropylene |
Air Valve | Bronce |
Maximum Suction Lift : | 5.8 m |
Maximum Diameter Solids: | 4.79 mm |
Características | |
Flow Rate to 590.5 LPM (156 GPM) | |
Max Pressure = 8.6 BAR (125 PSI) | |
Wetted Housings (Water Chambers and Manifolds) |
|
Material | Ship Wt |
Aluminum | 31.8 kg |
Cast Iron | 47.1 kg |
316 S.S. | 51.0 kg |
NON-Wetted Housings | |
Description | Material |
Center Block | Polypropylene |
Air Chambers | Aluminum, 316 S.S. |
Air Valve | Bronce |
Características | |
Flow Rate to 919 LPM (242.7 GPM) | |
Max Pressure = 8.6 BAR (125 PSI) | |
Wetted Housings (Water Chambers and Manifolds) |
|
Material | Ship Wt |
Aluminum | 59.9 kg |
Cast Iron | 98.0 kg |
316 S.S. | 89.8 kg |
NON-Wetted Housings | |
Description | Material |
Center Block | Aluminum |
Air Chambers | Aluminum,Stainless Steel |
Air Valve | Polypropylene |
PRIME PUMPS CHILE
Santiago - Chile
T: (56) 2 2581 3457
www.prpumps.cl
PRIME PUMPS LLC
Katy - Texas
T: (281) 645 6499
www.prpumps.com
PRIME PUMPS INC
MIAMI - FL
T: (786) 223 7811
www.prpumps.com
Copyright © 2007-2023 Prime Pumps LLC. All Rights Reserved